→ Applies to: Hyperion 9.x and above

Ensure one of the following prerequisites is met before starting:
– Create the USB drive with Hyperion. For instructions, refer to “How to Create a Bootable USB Drive with Hyperion”
– Mount the ISO via the Remote Board.

Step 1. Connect the USB stick or mount the ISO to the physical server on which you want to install Hyperion

Step 2. Reboot the server

Step 3. Select the Installation media, then press Enter

Step 4. Select the Automatic install option, then press Enter

Wait for completion

Upon completion, the server will automatically shut down. Manually power the server back on to trigger the First Boot Initialization.

Step 5. Wait for the SynetoOS first boot

The IP address will not be visible in the ESXi console until the initial system installation is completed (approximately 10 minutes)

Step 6. Proceed with the configuration (“SynetoOS 6 Quick Setup”)