This article lists Dell PowerEdge 17th Generation supported server models and related certified components for installing SynetoOS (Software Only).
PREREQUISITES
To ensure optimal performance, the following system requirements must be met:
– Memory: SynetoOS requires a minimum of 32 GB of dedicated RAM.
– Storage: At least 20% of the total storage capacity must remain free.
– VMware ESXi: The Boot Environment is mandatory.
– Syneto Hyperion: Two SSDs dedicated to the Hypervisor are required. Alternatively, a Boot Environment can be used if present.
Validated Platforms
| Model | Format | Official Datasheet |
| PowerEdge R470 | Rack 1U | PowerEdge R470 Specification Sheet |
| PowerEdge R570 | Rack 2U | PowerEdge R570 Specification Sheet |
| PowerEdge R770 | Rack 2U | PowerEdge R770 Specification Sheet |
Validated Components
| Component | Code | Description | Part Number |
| RAID Controller | 405-ABDM | H965i | 3KWJN, GT7YG, WXXHY, NG8NP |
| Embedded System Management | 634-CSHS, 634-CSHX | iDRAC 10 Enterprise | GN30R80 |
- The RAID Controller (H965i) is managed by the SynetoOS controller VM in passthrough.
- The Embedded System Management (iDRAC 10 Enterprise) is used for remote out-of-band management.
Boot Environment
A boot environment on an x86 server consists of the hardware, firmware, and software components responsible for initializing the system and loading the operating system.
Syneto supports any of the boot environment options listed below. If a supported boot environment is available, the SynetoOS operating system will be installed on it.
| Product Name | Part Number | Requirements | Official Datasheet |
| DELL BOSS-N1 | NH7WD, 490-BLCZ | - | Dell Boot Optimized Storage Solution-N1 |
⚠️ Selection requirement
Select only one of the boot environment options.
Do not select multiple components, as they are alternative solutions for the same purpose.