→ Applies to: Hyperion 9.x and above
Ensure one of the following prerequisites is met before starting:
– Ensure to create the USB drive with Hyperion. For instructions, refer to “How to Create a Bootable USB Drive with Hyperion”
- Ensure to mount the ISO via the Remote Board.
Step 1. Connect the USB stick or mount the ISO to the physical server on which you want to install Hyperion
Step 2. Reboot the server
Step 3. Select the Installation media, then press Enter
Step 4. Select the Interactive install option then press Enter
Step 5. Select the Time and Date field
Step 6. Select Region and City, then click Done
Step 7. Select the Installation Destination field
Step 8. Select only the disk on which to install the SynetoOS, then click Done
Step 9. Click on Begin Installation
Wait for completion
Upon completion, the server will automatically restart.
Step 10. Wait for the SynetoOS first boot
The IP address will not be visible in the ESXi console until the initial system installation is completed (approximately 10 minutes)
Step 11. Proceed with the configuration (“SynetoOS 6 Quick Setup”)