This article lists Fujitsu PRIMERGY RX2530 supported server models and related certified components for installing SynetoOS (Software Only).
PREREQUISITES
To ensure optimal performance, the following system requirements must be met:
– Memory: SynetoOS requires a minimum of 32 GB of dedicated RAM.
– Storage: At least 20% of the total storage capacity must remain free.
– VMware ESXi: The Boot Environment is mandatory.
– Syneto Hyperion: Two SSDs dedicated to the Hypervisor are required. Alternatively, a Boot Environment can be used if present.
Validated Platforms
| Model | Format | Official Datasheet |
| RX2530 M8 | Rack 1U | RX2530 M8 Specification Sheet |
Validated Components
| Component | Code | Description | Part Number |
| HBA Controller | - | PSAS CP700i LP | PYBSC4FBL |
| Embedded System Management | - | iRMC S6 Advanced pack | PYBRMC44 |
- The RAID Controller (PSAS CP700i LP) is managed by the SynetoOS controller VM in passthrough.
- The Embedded System Management (iRMC S6 Advanced pack) is used for remote out-of-band management.
Boot Environment
A boot environment on an x86 server consists of the hardware, firmware, and software components responsible for initializing the system and loading the operating system.
Syneto supports any of the boot environment options listed below. If a supported boot environment is available, the SynetoOS operating system will be installed on it.
| Product Name | Part Number | Requirements | Official Datasheet |
| PDUAL CP300 LP | PYBDMCP35L | - | PDUAL CP300 FH/LP Boot Storage Adapter |
| SSD SATA 6G 240GB M.2 N H-P for VMware | PYBMF24NVD | - | - |
⚠️ Selection requirement
Select only one of the boot environment options.
Do not select multiple components, as they are alternative solutions for the same purpose.