The installation requires the entire physical host to be rebooted
PREREQUISITES
■ Remote Board: ensure you have access to the remote board interface for remote management;
■ Java: verify that Java is correctly installed on your workstation, to support the installation of the operating system;
■ DHCP: ensure at least two IP addresses are available via DHCP, for network configuration;
■ Internet Access (mandatory): to successfully install the software
■ USB IMAGE: download the correct USB image file based on the versions of SynetoOS you want to install
→ SynetoOS 6.0.2 (7376) + Syneto Hyperion
■ ISO: download the correct ISO file based on the versions of SynetoOS you want to install
→ SynetoOS 6.0.2 (7376) + Syneto Hyperion
1. OS Installation DRIVE LOGIC
→ Installation Drive Selection Logic in Hyperion
2. Supported Platforms Prerequisites
Lenovo Hardware:
→ SynetoOS on Lenovo ThinkSystem V3 Servers
HPE Hardware:
→ SynetoOS on HPE ProLiant Gen10 Servers
→ SynetoOS on HPE ProLiant Gen11 Servers
DELL Hardware:
→ SynetoOS on Dell PowerEdge 14th Generation Servers
→ SynetoOS on Dell PowerEdge 15th Generation Servers
→ SynetoOS on Dell PowerEdge 16th Generation Servers
→ SynetoOS on Dell PowerEdge 17th Generation Servers
3. Wipe Disks
→ How to Erase Disks Before Installing Hyperion on Bare Metal Servers with WipeFS
4. BIOS and RAID configuration
Syneto Hardware:
→ How to Configure Syneto Hardware to Install Hyperion
HPE Hardware:
→ How to Configure HPE ProLiant Gen10 to Install Hyperion
→ How to Configure HPE ProLiant Gen11 to Install Hyperion
DELL Hardware:
→ How to Configure Dell PowerEdge 14th Generation to Install Hyperion
5. Install SynetoOS 6 with Hyperion
→ How to Install SynetoOS 6 with Hyperion
6. Troubleshooting management IP missing
→ How to Solve "Management IP Missing" in SynetoOS 6